These replacement bulbs are no longer available from GKI Bethlehem with the blue header card. Instead, we would recommend our new replacement packs that are the same bulb shape and specifications, seen here.
2.5 volt super bright mini replacement lamps specifically made for GKI Bethlehem light sets. May be used in any other light set that needs super bright 2.5 volt bulbs that match the specifications provided below. Pack includes 20 clear lamps. Bulbs come with GKI Bethlehem bases. These bulbs are traditional mini replacement bulbs but are pinched at the bottom end of the lamp to allow for a snug fit inside GKI Bethlehem's unique bases. Because of the pinched base, they will fit most any other light set as well - the husk at the bottom will just need to be removed.
These are what is considered a super bright replacement bulb, since each bulb is rated at 200 mA (or 0.5 watts). If these bulbs are used in a standard 2.5 volt light set, the bulbs will not glow bright as their names suggests, instead they will glow dim. To be sure that you are getting the correct replacement bulbs, but sure to look for the mA rating or the recommended watts for each bulb for your particular light set. These specifications are provided on a white tag near the plug of every light set.
2.5 volt, 200 mA, 0.5 watt
Length of glass - 15/16"
Length of wires - 3/8"
Diameter of glass - 5 mm
How do I make sure that I need Super Bright replacements?
These are Super Bright replacement bulbs, which is a loosely used term when it comes to light sets and replacement bulbs. The most important thing to note here, is that Super Bright means that these bulbs require higher amperes to create the brighter light. Please be sure to look at the white tag close to the male plug of the light set you are trying to fix. This tag should mention the words "super bright" or 200mA (.2A) for the replacement bulbs. Sometimes it may even mention the wattage, which for Super Bright 2.5 volt bulbs would be 0.5 watts. Please give us a call if you have any questions: 1-877-750-0971!
Please note: Because of the many varieties of bases/sockets on mini lights, you may need to remove these bulbs from their bases so that you can reuse the base/husk from your burnt out bulbs. It is important to hold on to your old bases, so that these new bulbs can be assured a good fit. In order to replace bulb, bend wires straight, pull bulb out from base, and then slip the new bulb in place.